Examination of surface porosity of current pulp capping materials by micro-computed tomography (micro-CT) method.

When dental pulp is exposed, it must be covered with a biocompatible material to form reparative dentine. The material used, besides being biocompatible, should have an ideal surface structure for the attachment, proliferation and differentiation of dental pulp stem cells. This study aimed to evaluate the porosity of the microstructures of four pulp capping materials using micro-computed tomography (micro-CT). Biodentine, Bioaggregate, TheraCal and Dycal materials were prepared according to the manufacturer's instructions using 2 × 9 mm Teflon molds. A total of 60 samples, 15 in each group, were scanned using micro-CT. Open and closed pores and the total porosity of the microstructures of the materials were assessed. The findings obtained from the study were analyzed via the Kruskal-Wallis test followed by the Mann-Whitney U test. The porosity of Bioaggregate was significantly higher than that of Biodentine, Dycal and TheraCal in all porosity values. While Biodentine did not show a statistically significant difference in open and total porosity values from either TheraCal or Dycal, closed porosity values of Dycal were significantly higher than those of Biodentine and TheraCal. Because of the affinity of cells to porous surfaces, the pulp capping materials' microstructure may affect the pulp capping treatment's success. From this perspective, the use of Bioaggregate in direct pulp capping may increase the success of treatment.

Characterization and Assessment of Physical Properties of 3 Single Syringe Hydraulic Cement-based Sealers.

INTRODUCTION: A number of sealers with different chemistries are badged as Bioceramic, implying biological activity, but have dissimilar properties, which has implications on the sealer properties and will affect the quality and outcome of root canal treatment. This study aimed to assess the physical and chemical properties of 3 hydraulic cement-based sealers, namely BC Universal sealer compared with Totalfill BC sealer and AH Plus Bioceramic. METHODS: The microstructure and composition of the sealers were assessed using scanning electron microscopy and energy dispersive spectroscopy after setting. The crystalline phases were assessed by X-ray diffraction analysis and the leachates were tested using inductively coupled plasma. All testing was performed at 0, 7, and 28 days. The physical properties of film thickness, flow, radiopacity, and solubility were evaluated using ISO 6876:2012 standards. RESULTS: All 3 sealers contained calcium, zirconium, and silicon. Totalfill BC had the highest calcium release at 7 and 28 days followed by AH Plus Bioceramic and BC Universal sealer. All 3 sealers adhered to the ISO standard in terms of flow and radiopacity. BC Universal sealer was slightly over the range (>50 µm) for film thickness. All sealers exceeded the solubility range set by ISO 6876:2012. CONCLUSION: Although these hydraulic cement sealers had similar components and delivery, the properties varied significantly. The testing of material properties to confirm the suitability for clinical use is necessary.

Histological evaluation of tissue reaction and new bone formation of different calcium silicate-based cements in rats.

BACKGROUND: The purpose of this study was to evaluate the local reactions and new bone formation of rat subcutaneous and bone tissue to different calcium silicate cements. METHODS: In this study, 80 rats were divided into five groups as control, BIOfactor MTA (BIO), NeoMTA Plus (NEO), MTA Repair Hp (REP), Biodentine (DENT) and then into two subgroups according to sacrification times (7, 30 days; n = 8). Polyethylene tubes filled with appropriate materials (test groups); empty tubes (control group) were implanted into the dorsum of each rat subcutaneously. For intraosseous implantation, materials were placed in the cavities created in tibia of rats. Subcutaneous tissue and tibia samples were stained with haematoxylin-eosin and subjected to histopathological analysis. A score (0-3) was used to grade inflammatory reaction and new bone formation. Data were analysed by Kruskal-Wallis and Mann-Whitney U tests (P < 0.05). RESULTS: Inflammatory reaction observed in subcutaneous and intraosseous tissues for 7 days decreased significantly in all groups over time (P < 0.05). It was determined that there was significant increase in new bone formation in REP, BIO, DENT groups over time (P < 0.05). CONCLUSION: Four contemporary bioceramic materials induced local inflammation and tissues changes shortly after subcutaneous implantation, which were reduced over time. In intraosseous implantation, all materials induced new bone formation over time. REGISTRATION NUMBER: ADJ-03-23-0134. © 2023 Australian Dental Association.

Efficacy of Chitosan Scaffolded Calcium Silicate-based Cements for Treating Internal Resorption Defects with Perforation: In Vitro Study.

AIM: The present study aimed to evaluate the efficacy of chitosan scaffold combined with calcium silicate cements in the management of internal resorption with perforation. MATERIALS AND METHODS: Internal resorption cavities were simulated in 20 human permanent maxillary incisors that were then divided into two groups: group I - biodentine and group II - chitosan scaffold combined with biodentine. The samples were evaluated for the mineralization activity at the end of the 7th day and 14th day using scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis. The data were recorded, tabulated, and then statistically analyzed. RESULTS: From the SEM-EDX analysis, the mean score of calcium and phosphorus ion uptake by the material was obtained. Statistical analysis by nonparametric Mann-Whitney test showed that there was statistically significant difference in calcium ion uptake at the end of the 7th day (p = 0.016) and at the end of 14th day (p = 0.043) between the group biodentine and group chitosan scaffold combined with biodentine (p < 0.05). CONCLUSION: In this present study, the use of chitosan scaffolds combined with biodentine showed a statistically significant difference in the mineralization activity when compared with pure biodentine. These scaffolded biomaterials exhibited greater potential for mineralization in vitro which can be efficiently used for the management of teeth with internal resorption with perforation. Further clinical trials are required for the understanding of their behavior in real-world scenarios. CLINICAL SIGNIFICANCE: Calcium silicate cements have often exhibited defective hard tissue barrier formation and hence there is a pressing need to search for newer biomaterials that can overcome these shortcomings. Scaffolded biomaterials provide a controlled microcellular environment for bioactivity, and they were found to be efficient in the remineralization of tooth structure. The present study findings indicate that these chitosan scaffolds can be efficiently used in combination with calcium silicate cements for the management of internal resorption with perforation to enhance the treatment outcome.

Evaluation of the Shear Bond Strength of Immediate and Delayed Restorations of Various Calcium Silicate-Based Materials with Fiber-Reinforced Composite Resin Materials.

Due to significant tissue loss in teeth requiring pulp treatments, hermetic restoration of the remaining dental tissues is one of the most crucial factors in determining the treatment's success. The adhesion of composite resins to calcium silicate cements (CSCs) is considered challenging. Consequently, it is crucial to identify the optimal method for obtaining optimal adhesion. The aim of the present study is to evaluate the shear bond strength (SBS) values of immediate and delayed restorations with fiber-reinforced composites on powder-liquid, premixed, and resin-containing flowable CSCs. In the present study, the SBS values obtained after immediate (14 min) and delayed (7 days) restorations of three different CSCs (NeoMTA2, NeoPutty, and TheraCal PT) with three different resin composite materials (EverX FlowTM, EverX PosteriorTM, and Filtek Z550) were compared. The fracture types were evaluated using a stereomicroscope and SEM. TheraCal PT had the highest SBS values for both immediate and delayed restorations, and the comparison with other materials showed a statistically significant difference (p = 0.001). In contrast, there was no statistically significant difference between the SBS values of NeoMTA and NeoPutty (p > 0.05). In both immediate and delayed restorations, there was no statistically significant difference between nanohybrid and fiber-reinforced composites (p > 0.05). The simple use and strong bonding ability of TheraCal PT with composite resins may provide support for the idea that it is suitable for pulpal interventions. Nevertheless, due to the in vitro nature of this study, additional in vitro and clinical studies are required to investigate the material's physical, mechanical, and biological properties for use in clinical applications.

Radiopacity evaluation of calcium silicate cements.

BACKGROUND: The aim of this study was to compare the radiopacity of calcium silicate cements using a digital imaging method. METHODS: Four calcium silicate cements, NeoMTA 2, OrthoMTA, ProRoot MTA, and Biodentine, were used in this study. Disk-shaped samples were prepared from each material and placed on a plexiglass plate. An aluminum step-wedge was placed alongside the samples on a digital sensor and exposed to 70 kVp and 8 mA from 30 cm away for 0.32 s. The greyness values ​​of the tested materials were measured digitally with the system software and compared with those of the step-wedge to determine the equivalent aluminum thickness. RESULTS: The radiopacity values, expressed in equivalent millimetres of aluminum, of the studied materials ProRoot MTA, OrthoMTA, NeoMTA 2, and Biodentine were 4.32 ± 0.17 mm Al, 3.92 ± 0.09 mm Al, 3.83 ± 0.07 mm Al, and 2.29 ± 0.21 mm Al, respectively. Statistically significant differences were found between the mean radiographic density values of the tested materials (p < 0.05). CONCLUSION: ProRoot MTA was the most radiopaque root canal filling material among the tested materials. All materials, except Biodentine, were found to be compliant with the minimum radiopacity requirements of ISO 6876 and ADA 57 standards.

Inflammatory response and odontogenic differentiation of inflamed dental pulp treated with different pulp capping materials: An in vivo study.

AIM: Previous studies have evaluated the pulpal responses to calcium silicate cements (CSCs) on normal dental pulp, but investigations on the effects of CSCs on inflamed pulp are limited. This study aimed to test the inflammatory response and odontogenic differentiation of inflamed rat dental pulp after direct pulp capping with CSCs. METHODOLOGY: Wistar rat molars pulps were exposed for 48 h to induce inflammation and then capped with ProRoot MTA (Dentsply), Biodentine (Septodont), RetroMTA (Bio MTA) and Dycal (Dentsply Caulk). The degree of pulpal inflammation and hard tissue formation was evaluated by histological analysis. Immunofluorescence staining for interleukin (IL)-6, osteocalcin (OCN) and runt-related transcription factor 2 (RUNX2) was also performed. RESULTS: After 4 weeks, complete recovery from inflammation was evident in 22%, 37.5%, 10% and none of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. Heavy hard tissue deposition as a continuous hard tissue bridge was observed in 77.8%, 75%, 70% and 60% of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. IL-6, OCN and RUNX2 were detected in all materials, mainly adjacent to areas of inflammation and reparative dentine formation. At one, two and 4 weeks, significant differences were not observed between the inflammation and hard tissue formation scores of the four material groups (p > .05). CONCLUSIONS: In this study, pulpal inflammation was still present in most specimens at 4 weeks after pulp capping and a significant number of samples showed incomplete and discontinuous dentine bridge formation. The results of this study suggest that initial inflammatory conditions of the pulp may risk the prognosis of teeth treated with CSCs.

In Vivo Assessment of the Apatite-Forming Ability of New-Generation Hydraulic Calcium Silicate Cements Using a Rat Subcutaneous Implantation Model.

Hydroxyapatite formation on endodontic hydraulic calcium silicate cements (HCSCs) plays a significant role in sealing the root canal system and elevating the hard-tissue inductivity of the materials. This study evaluated the in vivo apatite-forming ability of 13 new-generation HCSCs using an original HCSC (white ProRoot MTA: PR) as a positive control. The HCSCs were loaded into polytetrafluoroethylene tubes and implanted in the subcutaneous tissue of 4-week-old male Wistar rats. At 28 days after implantation, hydroxyapatite formation on the HCSC implants was assessed with micro-Raman spectroscopy, surface ultrastructural and elemental characterization, and elemental mapping of the material-tissue interface. Seven new-generation HCSCs and PR had a Raman band for hydroxyapatite (v1 PO43- band at 960 cm-1) and hydroxyapatite-like calcium-phosphorus-rich spherical precipitates on the surfaces. The other six HCSCs with neither the hydroxyapatite Raman band nor hydroxyapatite-like spherical precipitates did not show calcium-phosphorus-rich hydroxyapatite-layer-like regions in the elemental mapping. These results indicated that 6 of the 13 new-generation HCSCs possessed little or no ability to produce hydroxyapatite in vivo, unlike PR. The weak in vivo apatite-forming ability of the six HCSCs may have a negative impact on their clinical performance.

Concentrated growth factor combined with iRoot BP Plus promotes inflamed pulp repair: an in vitro and in vivo study.

BACKGROUND: Platelet concentrates combined with calcium silicate cements may promote reparative dentin formation. However, few studies have reported their effect on dental pulp inflammation. This study aimed to evaluate the effects of concentrated growth factor (CGF) combined with iRoot BP Plus on inflammatory human dental pulp stem cells (hDPSCs) in vitro and inflamed pulp in rats in vivo. METHODS: The proliferation of LPS-stimulated hDPSCs treated with 50% CGF with/without 25% iRoot BP Plus was evaluated using Cell Counting Kit-8 on days 1, 4 and 7. The expression of genes associated with inflammation on day 1 and differentiation on day 14 was analysed by real-time polymerase chain reaction. The exposed pulp of rat maxillary molars was injected with 10 mg/mL LPS and directly capped with CGF membrane with/without iRoot BP Plus extract for 1, 7 and 28 days. The teeth were subjected to histologic analyses and immunohistochemistry. RESULTS: The proliferation rates of the inflammatory hDPSCs after the combination treatment were significantly higher than those after the other treatments on days 4 and 7 (P < 0.05). IL-1ß, IL-6, and TNF-α levels were increased in inflammatory hDPSCs but decreased after treatment with CGF combined with iRoot BP Plus extract, whereas IL-4 and IL-10 showed the opposite expression patterns. Expression of the odontogenesis-related genes OCN, Runx2, and ALP was dramatically enhanced by combined treatment with CGF and iRoot BP Plus extract. In rat pulp, the average inflammation scores of the CGF and CGF-iRoot BP Plus groups significantly decreased in comparison with those of the LPS group (P < 0.05), and the CGF-iRoot BP Plus group had more reparative dentin than the CGF and BP groups. Immunohistochemical staining showed fewer M1 macrophages on day 1 and more M2 macrophages on day 7 in the CGF-iRoot BP Plus group than in the other groups. CONCLUSIONS: The combination of CGF and iRoot BP Plus showed a synergistic effect on anti-inflammatory potential and promoted greater pulp healing than CGF or iRoot BP Plus alone.

Rheological Properties and Setting Kinetics of Bioceramic Hydraulic Cements: ProRoot MTA versus RS.

Hydraulic calcium silicate-based cements (HCSCs) have become a superior bioceramic alternative to epoxy-based root canal sealers in endodontics. A new generation of purified HCSCs formulations has emerged to address the several drawbacks of original Portland-based mineral trioxide aggregate (MTA). This study was designed to assess the physio-chemical properties of a ProRoot MTA and compare it with newly formulated RS+, a synthetic HCSC, by advanced characterisation techniques that allow for in situ analyses. Visco-elastic behaviour was monitored with rheometry, while phase transformation kinetics were followed by X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared (ATR-FTIR), and Raman spectroscopies. Scanning electron microscopy with energy-dispersive spectroscopy, SEM-EDS, and laser-diffraction analyses was performed to evaluate the compositional and morphological characteristics of both cements. While the kinetics of surface hydration of both powders, when mixed with water, were comparable, an order of magnitude finer particle size distribution of RS+ coupled with the modified biocompatible formulation proved pivotal in its ability to exert predictable viscous flow during working time, and it was more than two times faster in viscoelastic-to-elastic transition, reflecting improved handling and setting behaviour. Finally, RS+ could be completely transformed into hydration products, i.e., calcium silicate hydrate and calcium hydroxide, within 48 h, while hydration products were not yet detected by XRD in ProRoot MTA and were obviously bound to particulate surface in a thin film. Because of the favourable rheological and faster setting kinetics, synthetic, finer-grained HCSCs, such as RS+, represent a viable option as an alternative to conventional MTA-based HCSCs for endodontic treatments.

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program.

BACKGROUND: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. METHODOLOGY: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. RESULTS: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. CONCLUSIONS: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

Physicochemical, mechanical and biological properties of nano-calcium silicate-based cements: a systematic review.

This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.

Inflammatory and differentiation cellular response to calcium silicate cements: An in vitro study.

AIM: Inflammatory-regenerative cell interaction is believed to mediate hard tissue formation. This study aimed to investigate the interaction between human inflammatory monocytes with human regenerative fibroblasts after exposure to different calcium silicate materials. METHODOLOGY: Human monocytes were cultured on three materials, polystyrene (PS), mineral trioxide aggregates (MTA) and biodentine (BD), in the presence or absence of lipopolysaccharide (LPS). Half of the monocyte-conditioned media (MoCM) of each group was used to analyse inflammatory cytokine secretion, namely TNF-α, IL-1ß, IL-1RA and IL-6. The remaining MoCM was used to culture recipient fibroblasts, measuring the cell number (proliferation) and levels of alkaline phosphatase (differentiation) and lactic acid dehydrogenase (cytotoxicity). RESULTS: In absence of LPS, MTA was associated with higher secretion of TNF-α and lower secretion of IL-1ß, while BD triggered higher secretions of both cytokines when both materials were compared to control (PS). When LPS was added, higher levels of all analysed cytokines were observed in the PS and BD groups, whereas for the MTA group, only TNF-α and IL-6 were increased. Fibroblasts responded differently to the MoCM from the different groups, revealing significant increases in proliferation and differentiation capacities, particularly when cultured in CM from monocytes exposed to MTA. The morphological evaluation revealed different patterns of fibroblast shape and spread in the different MoCM groups. CONCLUSION: Calcium silicate materials modulate the monocyte inflammatory response, which subsequently induce differential effects on the recipient fibroblasts. MTA appears to promote the secretion of prodifferentiation signals from the monocytes, which are received by fibroblasts, promoting their proliferation and differentiation. The model represents a promising tool to evaluate the interaction of different cells in response to different materials.

Selective removal to soft dentine or selective removal to firm dentine for deep caries lesions in permanent posterior teeth: a randomized controlled clinical trial up to 2 years.

OBJECTIVES: The aim of this randomized clinical trial was to compare selective removal to soft dentin (SRSD) and selective removal to firm dentin (SRFD) in permanent teeth. The primary outcome of the study was to compare the success rates of the two caries removal techniques. The secondary outcome of the study was to investigate whether or not calcium silicate-based material (CS) had an effect on the success rate of the treatment. MATERIALS AND METHODS: Between November 2018 and March 2020, patients with deep caries lesions were invited to participate in the study. Posterior teeth (N = 165) with primary caries lesion radiographically extending ¾ of dentin and positive response to cold test were randomly selected. A total of 134 participants meeting the inclusion criteria were randomized to SRSD and SRFD (control) groups. After the caries removal procedure, teeth with exposed pulps were assigned to the pulp exposure (PE) group, and the SRSD group was further divided into test 1 (with CS) and test 2 groups (without CS). Success was defined as a positive response to the cold test, a negative response to percussion, the absence of pain, an abscess, a fistula, and periapical alterations. Fisher-Freeman-Halton exact tests, Kaplan-Meier survival analysis, and the log-rank tests were performed for comparisons between groups. RESULTS: No statistically significant difference was found between the success rates of test 1 (100%) and test 2 (93.5%) groups, whereas the proportion of success in control (82.4%) and PE (84%) groups were significantly lower when compared with test groups (p = 0.024; p < 0.05) at the end of 2-year follow-up. CONCLUSIONS: SRSD had a higher success rate when compared to SRFD to treat deep carious lesions after 2 years of follow-up. The use of CS material after SRSD as a liner had no effect on the treatment outcome. CLINICAL RELEVANCE: SRSD with good coronal sealing might be recommended without CS application for the treatment of deep caries lesions in permanent teeth. TRIAL REGISTRATION: Clinical trial registration number NCT04052685 (08/09/2019).

Microstructure and color stability of calcium silicate-based dental materials exposed to blood or platelet-rich fibrin.

OBJECTIVES: To investigate the effects of blood and platelet-rich fibrin (PRF), commonly used scaffolds in regenerative endodontic treatment (RET), on the hydration, microstructure, and color stability of three hydraulic calcium silicate cements (HCSCs), OrthoMTA, RetroMTA, and TotalFill-BC-RRM. MATERIALS AND METHODS: The HCSCs were prepared and placed into polyethylene molds and transferred to Eppendorf tubes containing PRF, blood, or PBS and then incubated for 1 week or 1 month. The microstructure and hydration of the cements were studied by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The chromatic alteration of materials was also measured using a spectrophotometer. The data for color stability were analyzed using 2-way analysis of variance and Tukey post hoc tests. RESULTS: There was no significant difference between the color stability of cements exposed to PBS (p > 0.05). The chromatic alteration of cements exposed to blood was significantly greater than those exposed to PRF and PBS (p < 0.001). In the presence of blood and PRF, the color change of OrthoMTA was significantly greater than that of RetroMTA and TotalFill (p < 0.05), with no significant difference between RetroMTA and TotalFill (p > 0.05). XRD analysis of all cements revealed a calcium hydroxide peak after 1-week and 1-month exposure to the media; however, OrthoMTA and TotalFill exposed to blood and PRF for 1 month showed weaker calcium hydroxide peaks. SEM images revealed cements exposed to PBS had a different surface microstructure compared to those exposed to blood and PRF. Furthermore, the surface microstructure of HCSCs was influenced by the type of cement radiopacifier (bismuth oxide or zirconium oxide). EDS analysis of the elemental composition in all groups displayed peaks of Ca, O, C, Si, P, and Al. CONCLUSIONS: Color stability, hydration behavior, and microstructure of HCSCs were affected by exposure to PRF and blood and the type of cement radiopacifier. CLINICAL RELEVANCE: As some important physicochemical properties of HCSCs could be influenced by the environmental conditions and the type of radiopacifier, alternatives to blood clot and HCSCs containing substitutes for bismuth oxide might be more suitable in RETs.

Comparative cytocompatibility of the new calcium silicate-based cement NeoPutty versus NeoMTA Plus and MTA on human dental pulp cells: an in vitro study.

OBJECTIVES: The aim of the present in vitro study is to determine the cytocompatibility of the recently introduced NeoPutty in contact with human dental pulp cells compared with its precursor NeoMTA Plus and the classic gold standard MTA Angelus. MATERIALS AND METHODS: Sample disks were obtained for each of the tested materials (5 mm diameter; 2 mm thickness; n = 30), along with 1:1, 1:2, and 1:4 material eluents. HDPCs were extracted and cultured with the tested materials (test groups) or in unconditioned medium (control group), and the following biocompatibility assays were performed: MTT assay, scratch wound assay, cell cytoskeleton staining assays, and cell attachment assessment via SEM. Additionally, material ion release and surface element composition were evaluated via ICP-MS and SEM-EDX, respectively. Each experimental condition was carried out three times and assessed in three independent experiments. Statistical significance was established at p < 0.05. RESULTS: 1:2 dilutions of all the tested materials exhibited a comparable cell viability to that of the control group at 48 and 72 h of culture (p < 0.05). The same was observed for 1:4 dilutions of the tested materials at 24, 48, and 72 h of culture (p > 0.05). All the tested materials exhibited adequate cytocompatibility in the remaining biocompatibility assays. MTA exhibited a significantly higher calcium ion release compared to NeoPutty and NeoMTA Plus (p < 0.05). CONCLUSION: The results from the present work elucidate the adequate cytocompatibility of NeoPutty, NeoMTA Plus, and MTA Angelus towards human dental pulp cells. CLINICAL RELEVANCE: Within the limitations of the present in vitro study, our results may act as preliminary evidence for its use in vital pulp therapy as a pulp capper. However, results need to be interpreted with caution until further clinical supporting evidence is reported.

Effects of calcium silicate cements on neuronal conductivity.

Objectives: This study evaluated alterations in neuronal conductivity related to calcium silicate cements (CSCs) by investigating compound action potentials (cAPs) in rat sciatic nerves. Materials and Methods: Sciatic nerves were placed in a Tyrode bath and cAPs were recorded before, during, and after the application of test materials for 60-minute control, application, and recovery measurements, respectively. Freshly prepared ProRoot MTA, MTA Angelus, Biodentine, Endosequence RRM-Putty, BioAggregate, and RetroMTA were directly applied onto the nerves. Biopac LabPro version 3.7 was used to record and analyze cAPs. The data were statistically analyzed. Results: None of the CSCs totally blocked cAPs. RetroMTA, Biodentine, and MTA Angelus caused no significant alteration in cAPs (p > 0.05). Significantly lower cAPs were observed in recovery measurements for BioAggregate than in the control condition (p < 0.05). ProRoot MTA significantly but transiently reduced cAPs in the application period compared to the control period (p < 0.05). Endosequence RRM-Putty significantly reduced cAPs. Conclusions: Various CSCs may alter cAPs to some extent, but none of the CSCs irreversibly blocked them. The usage of fast-setting CSCs during apexification or regeneration of immature teeth seems safer than slow-setting CSCs due to their more favorable neuronal effects.

Current status on antimicrobial activity of a tricalcium silicate cement.

Biodentine (BD) is a bioactive material with many indications in endodontic therapy. The purpose of this study was to compile and review the outcomes of in vitro and in vivo studies of BD in terms of antimicrobial effectiveness. An electronic search was carried out in PubMed, from January 2009-April 2021 using the keywords: (Biodentine or dentine substitute or "Ca3SiO5" or tricalcium silicate cement or bioceramic cement) and (antimicrobial activity or antimicrobial effect or antimicrobial effectiveness or antibacterial activity or antibacterial effect or antibacterial effectiveness or antibiofilm activity or antibiofilm effectiveness). Two independent reviewers evaluated the studies for eligibility. All studies that did not include BD or its antimicrobial properties, as well as abstracts not written in English, were excluded. This review identified the need to develop standardized methods to evaluate antimicrobial activity in vitro. Most of the studies were against planktonic bacteria and gave conflicting results. Studies ex vivo and in vivo against biofilm are required to elucidate the antimicrobial activity of BD.

Effect of exposure to etidronic acid on the bond strength of calcium silicate-based cements after 1 and 21 days: an in vitro study.

BACKGROUND: After reparation of root perforations with calcium silicate-based cements (CSBC), the surface of the material is expected to be exposed to root canal irrigants (RCI) while resuming the root canal treatment. METHODS: The aim of this study was to compare the effect of exposure to a mixture of sodium hypochlorite (NaOCl) and etidronic acid (HEBP) or other irrigants on the Push Out Bond Strength (POBS) of CSBC after two different setting times. 240 root slices 1 mm thick were obtained from single-rooted human teeth. A 1.4 mm diameter perforation was performed on each slice and filled with Biodentine (BD) or ProRoot MTA (PMTA). After 1 or 21 days they were exposed to 17% ethylenediaminetetraacetic acid, 5.25% NaOCl, a mixture of 5.25% NaOCl and 9% HEBP (NaOCl + HEBP) or saline (n = 15) and submitted to a push-out test. POBS results were analysed with ANOVA and Tukey tests. RESULTS: BD showed higher POBS than PMTA after 1 day (p < .05). After 21 days no differences were found between materials. After 1 day exposure to NaOCl + HEBP resulted in higher POBS, compared to the other irrigants (p < .05). CONCLUSION: POBS results are influenced by the cement, the setting time and the exposure to irrigants.

Evaluation of the Interfaces between Restorative and Regenerative Biomaterials Used in Vital Pulp Therapy.

BACKGROUND: Calcium-silicate-based cements (CSC) have gained an increasing scientific and clinical relevance, enabling more conservative approaches, namely pulp preservation and regeneration therapies. This research aims to study the influence of four clinical variables on the interfaces between CSC and composite adhesive restoration, concerning shear bond strength (SBS) and ultra-morphological patterns. METHODS: SBS tests were performed in 320 specimens divided in 16 groups (n = 20) according to: two CSC (NuSmile® NeoMTA, BiodentineTM); two adhesive systems (ClearfilTM SE Bond 2 (CSEB2), ClearfilTM Universal Bond Quick (CUBQ)); optional application of an additional hydrophobic bonding layer (HBL); two restoration times (immediate, seven days). Scanning electron microscopy (SEM) was performed to conduct the ultra-morphology interface analysis in 32 deciduous molars prepared and randomly allocated into the 16 groups. RESULTS: Globally, SBS tests showed higher bond strength of CUBQ compared to CSEB2 (p < 0.001), as with an additional HBL application (p = 0.014) and delayed restoration (p < 0.001). SEM showed the interpenetration between adhesive systems and CSC forming a hybrid layer, whose depth and thickness depended on the restoration time and adhesive strategy. CONCLUSIONS: The independent clinical variables adhesive system, application of an additional HBL and restoration time affected the bond performance and ultra-morphological interface between composite adhesive restoration and CSC.